Welcome to Liang Fang Shen Qi,The company is Customize laser measurement toolR & D and manufacturers,Quality assurance.

当前位置:home > EVENTS > common problem»

Return to list page

How to use the Noah method underground cable?

laser measurement,laser measurement tool,laser measurement wholesale,Customize laser measurement tool,laser measurement Customize,wholesale laser measurement tool

How to use the Noah method underground cable?



Buried laying, generally 0.8 meters or less, at least to the permafrost layer, armored cables, if the low voltage, it is YJV22 or YJV23 (for example), dig a trench, the bottom is soft soil, there is no need to lay without stones Sand, if not, lay 10cm sand, and then lay the cables. After laying, lay 20cm thick sand, cover with bricks, cover with soft soil, then backfill, don't fill big stones, let him pick them out, if necessary, bricks Above, 30cm is compacted, (generally do not do), pay attention to avoid pipelines, especially gas and heat pipelines, cross, walk from the bottom, separated by more than 30 meters, don't forget to cover the bricks, it is best to be separated by half a meter in parallel If you encounter the road, you need to deepen the burial, at least one meter, and add a protection pipe, the protection pipe should be half a meter on both sides of the road (the specification seems to be one meter or 2 meters, can't remember...), the protection pipe is flared , If necessary, it can be grounded by a protective tube. Pay attention to whether the cable is damaged before the cable is concealed. Check the degree of damage and whether it needs to be replaced. At the cable trench, or make one every 30-50m, there must be protection pipes or protection wells in and out of the ground.


Convenient tools for professional cable tester workers:

How to use the Noah method underground cable?

Underground Cable Tester, Wire Tester Portable Locator Wire Tracker , Detecting Wall and Underground Cables, Electrical Lines, Gas and Water Supply Pipeline Path

At Shopify wholesale, the website is:BUY NOW

How to use the Noah method underground cable?

  • Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth

  • Detecting and Locating breaks and short circuit in cables and electrical lines buried in wall or underground.

  • How to use the Noah method underground cable?

  • Detecting the laid metal tap water pipe and metal heating pipe.

  • Detecting interruptions and short-circuits in floor heating.

  • How to use the Noah method underground cable?

  • Detecting fuses and assigning current circuits,tracing sockets and junction boxes having accidentally been covered by plastering.

  • How to use the Noah method underground cable?

  • The transmitter is integrated with the function of AC/DC voltmeter, which can measure 12 to 400V AC/DC voltage on a linear basis.

  • Our products are included in English, if you have any difficulties in use, you can contact us to solve it.

  • How to use the Noah method underground cable?

Brand NameLiang Fang Shen Qi
Ean0652069877675
Included ComponentsPCB
Measurement AccuracyGOOD
Measurement TypeVoltmeter
Number of Items1
Part NumberKC826
Power Source TypeGas Powered
UNSPSC Code41113600
UPC652069877675


About

广州科创宏技术有限公司

According to the introduction of Introduction to Kechuang Cl…

QQ OnlineQQ Online
QQ Online 0068-87578114

Back to top

QQ Online
Consultation telephone

Consultation telephone

87578114

WhatsApp
{pboot:companyname}